Invisible Oil Primer

Item No.: 526010SA 526025A 526025SA

Primer for Invisible Oil

Gives the floor an untreated appearance
Resistant to liquids such as water, coffee, tea and red wine
Gives the wood a beautiful, breathable surface
Indoor climate certified

Colours

*The wood sample is shown on oak

Natural

Packaging

Certifications

Product Details

Invisible Oil Primer is a water-based wood primer with excellent adhesion that provides wood with a matte, untreated look when used in combination with WOCA Invisible Oil. The first step in WOCA’s water-based oil system, ideal for light wood types. The system creates a comfortable, soft surface with a water-repellent finish that is easy to maintain.

Safety data sheet available on request.
Contains: 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
The following applies only for colours that contains more than 1 % white pigment.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

VOC:

10 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

pH-value:

pH 7-8

Shelf life:

3 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-12 m²/L

Colour product:

Natural

VOC:

5 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

pH-value:

pH 7-8

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-12 m²/L

Colour product:

Natural

Packaging sizes:

2.5 L

VOC:

10 g/l, maximum VOC content (A/i (WB)): 140 g/l.

Density:

1.00-1.10 g/ml.

pH-value:

pH 7-8

Shelf life:

2 years

Application Temperature:

+15-25°C and approx. 50% air humidity.

Coverage:

8-12 m²/L

Colour product:

Natural

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Thoroughly shake the container of Invisible Oil Primer, both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.

Apply the primer using a short-bristled paint roller in an even coat. Work in small areas of no more than 20 m² at a time.

Leave the primer to soak in for up to 5 minutes.

Rub the primer into the wood until the floor appears saturated. Use a buffing machine with a beige or Bordeaux pad. Regularly change the buffing pad to prevent the primer from lumping.

Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.

Leave the floor to dry for 3-4 hours at 20°C. Drying time will vary by temperature, humidity and application quantity. Lower temperatures and/or higher humidity can extend drying time.

Between layers, sand the dry surface using a bordeaux pad or a lacquer sanding pad and vacuum thoroughly.

Apply Invisible Oil. Carefully follow the product instructions.

Invisible Oil must be applied when using Invisible Primer. After 24 hours, we recommend that the primed and oiled surface is treated with Invisible Oil Care to improve the floor’s resistance to stains and wear.

Products you need