Exterior Wood Cleaner

Item No.: 617925A 617927A 617910A 617910SA

Removes dirt and stains

Effective removal of dirt, stain and grease
Prepares the surface for subsequent treatment
Economical and easy to use
Ideal for all species of wood

Colours

*The wood sample is shown on pressure impregnated pine

Colourless

Packaging

Certifications

Product Details

Exterior Wood Cleaner was developed for the thorough cleaning of all types of wood surfaces, such as terraces, garden furniture, fences, canopies, doors and windows. The product quickly and efficiently dissolves dirt, thereby assuring an optimal surface for subsequent treatment.

Danger!
Causes serious eye damage.
Get medical attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists:
Wear eye/face protection.

Declaration:

>5% ≤15%: Non-ionic surfactants.

Density:

1.00-1.10 g/ml.

pH-value:

pH 10-11

Shelf life:

3 years

Application Temperature:

+10-25°C, ideally cloudy weather.

Coverage:

10-50 m²/L

Colour product:

Colourless

Packaging sizes:

1 L – 2.5 L

Declaration:

>5% ≤15%: Non-ionic surfactants.

Density:

1.00-1.10 g/ml.

pH-value:

pH 10-11

Shelf life:

3 years

Application Temperature:

+10-25°C, ideally cloudy weather.

Coverage:

10-50 m²/L

Colour product:

Colourless

Declaration:

>5% ≤15%: Non-ionic surfactants.

Density:

1.00-1.10 g/ml.

pH-value:

pH 10-11

Shelf life:

3 years

Application Temperature:

+10-25°C, ideally cloudy weather.

Coverage:

10-50 m²/L

Colour product:

Colourless

Packaging sizes:

1 L – 2.5 L

Declaration:

>5% ≤15%: Non-ionic surfactants.

Density:

1.00-1.10 g/ml.

pH-value:

pH 10-11

Shelf life:

3 years

Application Temperature:

+10-25°C, ideally cloudy weather.

Coverage:

10-50 m²/L

Colour product:

Colourless

Treatment should only be performed in dry weather conditions. Avoid direct sunlight and excessive heat.

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

Remove all loose foliage, branches, etc. and then soak the wood with water. Use a garden hose if possible.

Mix Exterior Wood Cleaner with water. If the wood is very dirty, a stronger dosage can be used.

Apply the cleaner in an even coat, using a brush or spray nozzle. Leave the cleaner to work for five minutes.

Scrub in the longitudinal direction of the wood grain using a stiff-bristled brush, until the surface is clean.

Rinse off the Exterior Wood Cleaner with plenty of water and leave the wood to dry for at least 24-48 hours at 20°C, before application of Exterior Wood Oil. The wood must be completely dry. If a completely smooth surface is desired, de-nip the wood with a 120-150 sanding pad before oiling.

Exterior Wood Cleaner can also be used on masonry and concrete.

Products you need