Worktop Oil (Industrial)

Número de artículo:

Oxidizing oil for wooden worktops

  • Safe for food contact
  • Easy application on a variety of processes
  • Provides a dirt and water-resistant surface
  • Contains natural oils
  • Can be used on all wood species
  • Highlights the glow and grain structure of the wood

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

This European standard specifies requirements for surfaces for indoor sports facilities.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus
20 L
Encontrar distribuidor

Detalles de producto

  • Descripción
  • Especificaciones
  • Ficha técnica
  • Ficha de datos de seguridad

COV:

300 g/l, contenido máximo de COV (A/i (BD)): 500 g/l.

Densidad:

0.90-0.95 g/ml.

Durabilidad:

3 años

Temperatura de aplicación:

+15-30°C y 50% de humedad del aire.

Rendimiento:

25-40 m²/L

Colores:

Natural

Almacenamiento:

+10-25°C. Mantener fuera del alcance de los niños. No lo exponga al calor (por ejemplo, la luz solar directa). Almacenar evitando heladas en invierno y en lugar fresco en verano.

Envases:

20 L

Viscosidad:

30-35 Seg. DIN Cup 4

Contenido de materia seca:

70-75%

Recomendación:

Wood humidity must not exceed 18%. High temperature and low air humidity will reduce drying times. Low temperature and high air humidity will extend drying times.

Endurecido completo:

7 días a 20°C

Worktop Oil is an air-hardening oil that penetrates deep into the wood. The oil is based on natural vegetable oils and ensures a worktop with great durability and resistance. The oil highlights the wood’s natural glow and gives the surface a natural, fresh appearance. Worktop Oil is safe for food contact and can be tinted in various colours.

Pasos de trabajo

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 150-180
Roller
  • Use smooth rubber roller shore 15-25 natural rubber or nitrile rubber
  • Apply the product 30-35 gr/m2
  • Or apply manually
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove oil by a cloth
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Or drying on racks
Stacking
  • 4-6 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 400-500
Roller
  • Use smooth rubber roller shore 15-25 natural rubber or nitrile rubber
  • Or apply manually
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Or remove oil by cloth
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Or drying on racks
Stacking
  • 24 h by 20 °C before packing
Viscosity correction: Correction can be made with WOCA Solvent only, #328575I.

Productos que necesitas

  • Cleaner for Oxidizing Oil Products
    Cleaner for Oxidizing Oil Products

    Cleans tools and machinery used for oxidative oils

Productos relacionados

Ver en la misma categoría

Worktop Oil (Industrial)

Oxidizing oil for wooden worktops