Master Classic 2K Hardener

Número de artículo:

Endurecedor para lacas 2K

  • Aporta fuerza y resistencia a los barnices
  • Low odour
  • Easy to mix and use

*La muestra de madera se muestra en roble

500 ML

Detalles de producto

  • Descripción
  • Especificaciones
  • Ficha técnica
  • Ficha de datos de seguridad

Densidad:

0.85-0.90 g/ml.

Durabilidad:

3 años

Temperatura de aplicación:

+15-25°C y 50% de humedad del aire.

Rendimiento:

8-10 m²/L

Colores:

Incoloro

Limpieza de herramientas:

Limpiar con agua y jabón

Almacenamiento:

+10-30°C. Mantener fuera del alcance de los niños. No lo exponga al calor (por ejemplo, la luz solar directa). Almacenar evitando heladas en invierno y en lugar fresco en verano.

Envases:

500 ML

Vida útil:

La mezcla debe usarse en las siguientes 5 horas. Agite/remueva bien antes de usar.

Olor:

Olor leve

Proporción de la mezcla:

10% o 500 ml en 5 L de barniz

Endurecedor para lacas 2K

Pasos de trabajo

Instructions
Products in use
It is important that both wood and lacquer have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and wipe the floor down afterwards, using a tightly-wrung water-soaked mop/cloth. Please note: WOCA Intensive Wood Cleaner can help to remove contaminates from fully sanded wooden floors before priming or lacquering. Please allow floor to fully dry overnight. The floor must be completely dry before priming or lacquering. When priming, use WOCA Master Base Primer for newly sanded wood to reduce side bonding. Alternatively, try WOCA Master Multi Primer for exotic wood species or old wood previously treated with oil or wax.

Recuerde siempre hacer una prueba en un lugar poco visible, a fin de verificar la compatibilidad de la superficie con el producto.

See technical Datasheet for waterbased finish for drying time and application.