Industrial Stain System 6+1

Número de artículo:

Para el tratamiento previo con color de suelos y muebles de madera

  • Aspecto único
  • Coloración instantánea
  • Se puede conseguir el efecto ahumado y termotratado
  • Apto para cualquier tipo de madera
  • Debe ser tratado posteriormente con un aceite WOCA

A+

All floor coating (care/treatment) products marketed in France are obliged to certify their products with an A+. The aim is to improve indoor air quality and, at the same time, enable consumers to choose environmentaly friendly products.

DiBt

DIBt is a German institute that tests and issues technical approvals for building materials.The aim is to improve the working climate for floor installers whilst ensuring a safe indoor air quality for the final consumer.

Danish Indoor Climate Labelling

Danish Interior Climate Labelling is a voluntary labelling system for products and materials which can document the effect of degassing. Indoor climate labelled materials are a natural component in sustainable construction, where a good indoor air quality contributes to social sustainability.

Anti Slip - R9

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Sports test

This European standard specifies requirements for surfaces for indoor sports facilities.

Fire test

The European Standard EN 13501-1, which measures the reactions of building materials to fire. The reaction is determined by how much a product contributes to a fire and is classified from A to F.

EN 71-3

A European standard test for contamination of harmful substances. This test is especially relevant for worktops, toys and kitchen utensils.

Food contactable

If you wish to avoid a spillover of harmful substances from worksurfaces to food then look for the Glass and fork symbol. The manufacturer has to document that the surface treatment of the product does not release release harmful substances into food products. This is tested by an independent third party who assesses the composition of the product. Look for the symbol!

IBR

Voluntary labelling that ensures the best possible indoor climate as well as minimum of bad odours and other forms of contamination. The product is tested by a third party independent examiner.

Nordic Swan

Nordic Swan is the official ecolabel in Scandinavia. The Nordic Swan label creates sustainable solutions based on life-cycle assessment and an overall desire to reduce the environmental impact from production and consumption of goods. This makes it easy for consumer and professional shoppers to choose the best products and services for the environment.

Anti Slip - R10

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Anti Slip - R11

DIN 51130 is a standardised anti-slip test for flooring. It is typically used for work places and official buildings where there is a requirement that products have the anti-slip test DIN 51130 with a classification from R9 to R13.

Emicode EC1 Plus
10 L
5 L
Encontrar distribuidor

Detalles de producto

  • Descripción
  • Especificaciones
  • Ficha técnica
  • Ficha de datos de seguridad

COV:

165 g/l, contenido máximo de COV (A/l (BA)): 200 g/l.

Densidad:

1.10-1.20 g/ml.

Valor de pH:

pH 8-9

Durabilidad:

2 años

Rendimiento:

40-50 m²/L

Colores:

Blanco, Marrón, Rojo, Amarilla, Azul, Natural

Almacenamiento:

+10-25°C. Mantener fuera del alcance de los niños. No lo exponga al calor (por ejemplo, la luz solar directa). Almacenar evitando heladas en invierno y en lugar fresco en verano.

Envases:

5 L, 10 L

Viscosidad:

20-25 Seg. DIN Cup 4

Contenido de materia seca:

10-20%

Industrial Stain System consiste en un tinte al agua diseñado para dar color a cualquier tipo de madera de forma sencilla y rápida. El sistema industrial de teñido realza la variedad natural de tonos de la madera. Se pueden conseguir modernos y únicos colores combinándolo con los aceites WOCA de secado oxidativo y UV. Los siete colores base están disponibles listos para usar o bien pueden combinarse entre ellos.

Pasos de trabajo

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Spray
  • 40-60 gr/m2
  • 20-30 gr/m2
  • Or use sponge roller
Roller
  • Use sponge roller shore 5 or type 2 or type 3
  • Apply 20-25 gr/m2
  • Or use spraymachine
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Hot air oven
  • Temperature 50-60 °C and good ventilation
  • Or stacking on racks
Stacking
  • 3-4 h by 20 °C
Intermediate sanding
  • Use sandingpaper grit 240-320
  • After sanding apply a WOCA Treat product
Se puede diluir con el tinte Natural para conseguir la intensidad de color deseada

Productos que necesitas

  • Cleaner for Water-based Products
    Cleaner for Water-based Products

    Cleans tools and machinery used for water-based products

Productos relacionados

Ver en la misma categoría

Industrial Oil No1

Aceite oxidantivo industrial de alto rendimiento para suelos de madera
+1

Industrial Oil 1505 Hardwax

Aceite oxidantivo industrial para suelos de madera que combina aceite y cera

Furniture Lacquer

Para tratamiento con barniz de muebles de madera
+1

UV Oil 508

Aceite UV 100% para suelos de madera con curado instantáneo