UV Oil 506

Varenummer:

100 % UV-topcoat for wooden floors with medium gloss

  • UV-topcoat with medium gloss
  • Topcoat in combination with WOCA UV-oils
  • Ensures UV-oiled floors that are ready for use

10 L
Find forhandler

Produktdetaljer

  • Beskrivelse
  • Specifikationer
  • Teknisk datablad
  • Sikkerhedsdatablad

VOC:

0 g/l, VOC-grænseværdi (A/e (OB)): 400 g/l.

Massefylde:

1.10-1.20 g/ml.

Holdbarhed:

2 år

Rækkeevne:

50-80 m²/L

Farver:

Natur

Opbevaring:

+10-25°C. Opbevares utilgængeligt for børn. Må ikke udsættes for høje temperaturer eller direkte sol. Opbevares frostfrit om vinteren og køligt om sommeren.

Emballage:

10 L

Tørstofindhold:

95-100%

Gennemhærdet:

Umiddelbart efter UV-tørring

UV-Oil 506 is a 100 % UV-oil that provides wooden floors with a durable finish with medium gloss for added strength. Using this oil ensures fast production speeds as the proven UV-technology dries and cures instantly and allows immediate packing at the end of the production line. Wooden floors finished with this topcoat do not require additional on-site treatment after installation.The oil can stand alone, but can also work as a topcoat for UV-oil 501

Arbejdstrin

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 120-150
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 15-20 gr/m2
  • Uv-oil 501 can be used as first coat
Uv-lamp
  • Use 2 lamps Mercury 600-800 mj/cm2
  • By pigmented oils please use Galium lamp
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Intermediate sanding
  • Use sandingpaper grit 400-500
  • Optional
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 5-10 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
  • Optional
Uv-lamp
  • Use 2 lamps Mercury 800-1000 mj/cm2