Neutral UV-Oil 2306

Numéro d'article:

Water-based UV-oil that maintains the unfinished look

  • Untreated appearance of the wood (invisible look) 
  • Ensures UV-oiled floors 
  • Fast production speeds

10 L

Détails du produit

  • La description
  • Caractéristiques
  • Fiche technique
  • Fiche de données de sécurité

COV:

110 g/l, teneur maximale en (A/i (PA)): 140 g/l.

Densité:

1.00-1.10 g/ml.

durée de conservation:

2 années

Consommation:

30-40 m²/L

Couleurs:

Naturel

Stockage:

+10-25°C. Tenir hors de portée des enfants. Ne pas exposer à la chaleur (par ex. au soleil). A conservez à l’abri du gel en hiver et au frais en été.

Emballage:

10 L

Viscosité:

50-55 Sec. DIN Cup 4

Teneur en matière sèche:

30-40%

Durcissement complet:

Immédiatement après le séchage UV

Neutral UV-Oil 2306 is a unique water-based UV-oil that provides the wood with a durable protection as well as maintains the untreated look of the wood. Using this oil ensures fast productions speeds.

Étapes de travail

Instructions
Products in use
The wood must be clean, dry and free from dust.

Sanding
  • Final sanding grit 150-180
Roller
  • Use sponge roller shore 5 or type 2 or type 3
  • Apply the product 25-30 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Make sure water is evaporated before uv-drying
Uv-lamp
  • Use 2 lamps Mercury 400-600 mj/cm2
Intermediate sanding
  • Use sandingpaper grit 320-400
Roller
  • Use smooth rubber roller shore 15-25 EPDM rubber
  • Apply 10-15 gr/m2
Even out
  • Use minimum two nylon brushes. 1st runs counterwise and 2nd runs counter-clockwise
Hot air oven
  • Temperature 35-40 °C and good ventilation
  • Make sure water is evaporated before uv-drying
Uv-lamp
  • Use 2 lamps Mercury 800-1000 mj/cm2
Viscosity correction: The product can be diluted with a maximum of 5 % water.An extra coat of Uv-oil 510 can be applied giving extra protection